Pentair ULTRATEMP HX 21KW Heat Pump UTHP-21-HX

Pentair ULTRATEMP HX 21KW Heat Pump (UTHP-21-HX)

The ULTRATEMP High Performance range of Heat pumps from Pentair Water offer unbeatable value accross their domestic range of horizontal  (HX) and verticle (VX) Discharge heat pumps.  Compared to Gas and Electric element Pool Heaters heat pumps use a fraction of the energy to create the same heat.

Heating Guide for 60,000 lt Pool (21 msq surface area) without a Thermal Blanket @ 24 degrees air: 

This heater will provide 12 months swimming @28 Degrees if used in conjunction with a thermal pool blanket.  
This heat pump will run approximately 10 Hours a day to maintain 28 Degrees. Total expected running cost per annum to maintain 28 Degrees @24 Cents / KWH is $1342.00 Per Annum.

Pentair ULTRATEMP Series unique features: • Heating and cooling capability • Automatic 4 way valve – auto defrost system • Electronic expansion valve (EEV2) – Increased energy savings by efficient fuel flow • Intuitive LCD Touch screen • Hydrophilic evaporator coating • Titanium threaded heat exchanger – 30% increase in heat transfer • Flow switch and high pressure cut out to ensure additional safety and protection • PVC and powder coated zincalume corrosion resistant cabinet • Low noise fan blades • Horizontal airflow

ABGAL Heatshield 5mm thermal pool blanket with heavy duty roller:

Heat Pump Specifications: • 9.5 KW Heat output rating @ 24 degrees air and 26 degrees water • 8.24 KW Heat output rating @ 15 Degrees air and 24 degrees water • 1.53 KW Power input @ 24 Degrees air • 6.20 C.O.P at 24 Degrees air • Unit Footprint (L x W) 945 x 417mm • Side Discharge • Rotary Compressor • Titanium Heat Exchange • 51db Noise Rating • Refridgerant Type R410A • Single Phase 240v Power 10 amps Max Running current

Installation Requirements:

  2 x 40mm pvc Tee's

  1 x 40mm 3 way valve

  1 x Boost pump (for independent heating set up) * not required in all installations.

  1 x Electrical connection  (not included in all quoted prices).